Depot Level Maintenance Technician - GMD Weapons Systems (GWS)

Job Description:

Description:What Were Doing
Become a part of something IMPACT-ful! Ground Missile Defense (GMD) is the heart of the Missile Defense System and a key element of our nation’s defense against ballistic missile attacks.

The GMD Weapon System (GWS) processes data from multiple sensors to identify and characterize the inbound ballistic missile threat, plans the best defensive solution, and launches the intercepting missiles to negate the threat.

The Work
A depot technician is a professional who uses their specialized knowledge to maintain, repair, and upgrade computer and electronic devices. They work on a variety of tasks, from installing software and databases to troubleshooting hardware problems. They also manage inventory, track call histories, and assist in system backups. Their duties may involve training other technicians, updating asset management, and configuring new and existing devices. Depot technicians often work with on-call support teams to resolve complex issues. They use various software applications to manage tasks and maintain system security. Their skills cover a wide range of operating systems, including Windows, Linux, and Unix.

A Day in the Life:

• Ensures test systems are setup per Acceptance Test Procedures (ATPs) and Qualification Test Procedures (QTPs).
• Resolves and corrects complex problems during operations, maintenance, and overhaul of (GMD) Ground-based Defense system/sub-system components.
• Works on small team for assembly, disassembly and troubleshooting of operational components to include a variety of electrical and mechanical components using general maintenance practices and product specifications to correct failures.
• Performs routine and complex functional/diagnostic tests and troubleshoots electrical/mechanical systems, using monitoring instruments and bench/automated test equipment, to determine root cause of initial or isolated failures.
• Visually inspects component before installation or usage to verify cleanliness and serviceability of components.
• Visually inspect printed circuit boards for cold solder joints, cracked ICs, CAPs and other potentially bad components.
• Performs certified soldering of components and surface mount components in accordance with current specifications.
• Proficient in the use of a wide range of test equipment to include multimeters, oscilloscopes, spectrum analyzers, signal generators, and power meters.
• Identifies and communicates potential issues concerning Safety, HazMat, OSHA, and Environmental Protection Agency (EPA).
• Prepares and submits any required maintenance reports and attends all maintenance related meetings.

Who We Are
Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Huntsville, AL is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of whats possible.

Why Join Us
Your Health, Your Wealth, Your Life
Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work.

Learn more about Lockheed Martins comprehensive benefits package here!

rmshotmiljobs
Basic Qualifications:
• HS Diploma or equivalent
• Minimum of two years of depot forward maintenance experience
• Associate Certified Electronic Technician (CETs) certification.
• IPC – 610/620 Certification
• Must have the ability to lift a minimum of 25 pounds.
• Manual dexterity to handle all types of hand tools (wrenches, pliers, crimp, screwdriver, etc.)
• Demonstrated ability to review technical manuals, drawings, schematics.
• Proficiency with Electrical Static Discharge control processes
• Active DoD Secret clearance
Desired Skills:
• Familiarity with any of the following: IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, and/or ANSI/ESD S20.20.
• IPC A-610 Class 2 or Class 3 soldering certificate
• Experience working with spacecraft, aircraft, rocket ordnance/rocket motors, and missile components all a plus.
• Experience with assembling, repairing, and testing mechanical and electrical components and systems.
• Ability to operate a Forklift, truck mounted crane, and other MHE associated equipment.
• Experience in isolating and correcting malfunctions using automatic and semi-automatic program maintenance diagnostics, unit self-tests, and Built-In Test Equipment (BITE) as well as industry standard commercial off the shelf external test equipment.
• Proficient in the use of a wide range of test equipment to include multimeters, oscilloscopes, spectrum analyzers, signal generators, and power meters.
• Proficiency performing electrical system diagnostics and troubleshooting to isolate and resolve root cause problems within a circuit card assembly (CCA) or electro-mechanical system.
• Graduate of a commercial or military maintenance school or program
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 9x80 every other Friday off
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Experienced Professional
Business Unit: RMS
Relocation Available: Possible
Career Area: Technicians
Type: Full-Time
Shift: First

• Familiarity with any of the following: IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, and/or ANSI/ESD S20.20.
• IPC A-610 Class 2 or Class 3 soldering certificate
• Experience working with spacecraft, aircraft, rocket ordnance/rocket motors, and missile components all a plus.
• Experience with assembling, repairing, and testing mechanical and electrical components and systems.
• Ability to operate a Forklift, truck mounted crane, and other MHE associated equipment.
• Experience in isolating and correcting malfunctions using automatic and semi-automatic program maintenance diagnostics, unit self-tests, and Built-In Test Equipment (BITE) as well as industry standard commercial off the shelf external test equipment.
• Proficient in the use of a wide range of test equipment to include multimeters, oscilloscopes, spectrum analyzers, signal generators, and power meters.
• Proficiency performing electrical system diagnostics and troubleshooting to isolate and resolve root cause problems within a circuit card assembly (CCA) or electro-mechanical system.
• Graduate of a commercial or military maintenance school or program

Job Ident #: 82046009872

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Huntsville, Alabama, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/